TS 1 Budget Spray Booth
Extraction and filtration without heating. The quickest, lowest-cost way to get spraying out of the open workshop.
- 6.9 × 3.9 × 2.7 m typical
- 12 000 m³/h
- 2 filter stages
- Built to any size
Best for: Fabrication and engineering workshops, industrial parts and components, furniture, start-up paint shops.
The TS 1 is the simplest booth in the range: a sealed, lit room that pulls overspray away from the painter and through filters before the air leaves the building. Clean air comes in through intake filters, moves across the work and is drawn out through paint arrestor media at the back wall.
It has no heater, so it suits workshops in warmer areas, industrial users spraying primers and enamels on parts, and anyone who needs to stop spraying in the open while they build up the business. When you are ready for faster curing, heating can be added to the same booth.
What you get
- Booth structure in 50 mm insulated panels, assembled on your floor
- Intake filters for clean incoming air, and main doors with viewing windows
- LED lighting along the ceiling line
- Rear extraction fan, filter plenum and exhaust ducting through the roof or wall
- Electrical controller with start and stop for fan and lights
- Delivery, installation, commissioning and operator training
Popular options
- Outdoor version under a steel canopy, for sites without space indoors
- Electrically actuated roof slot for overhead cranes
- Diesel or infrared heating added later, without replacing the booth
Read next: Downdraft vs cross draft: which airflow do you need?
| Internal size (standard) | 6 900 mm L × 3 900 to 4 000 mm W × 2 700 mm H |
|---|---|
| Entrance | 3 000 mm W × 2 300 mm H |
| Airflow method | Cross draft, extraction to the rear |
| Structure | 50 mm insulated panels |
| Lighting | 8 to 9 LED fittings |
| Air system | Rear-mounted extraction fan, 2.2 to 3 kW |
| Airflow | 12 000 m³/h |
| Power | ± 3 to 5.5 kW, 380 V, 50 Hz, 3-phase |
| Filtration | 1. Washable pleated panel intake filters 2. Fibreglass paint arrestor media |
| Heating | Not included; can be added |
Your size, not ours
The TS 1 is shown at 6 900 × 3 900 × 2 700 mm, but we build it to the internal size your work needs. Type in your dimensions or drag the sliders. The suggested model updates as you go.
When you send a quote request, include the largest item you paint, your building's door and roof height, and any crane or lift you use. We will confirm the size on a drawing before manufacture.
TS 1 installations and details
TS 1 questions
Is a TS 1 good enough for a high-quality finish?
Can a TS 1 be installed outside?
How often are the filters changed?
Other models
TS 2
Downdraft airflow with automatic heating and curing. The step up for workshops that need…
TS 3
Our flagship. Separate intake and extraction fans, ceiling and wall lighting, and four…
TS 4
TS 3 technology with drying air movers for water-based paint systems, so flash-off times…
TS 5 Jumbo
A taller, longer version of the TS 3 for large components, machinery, plant equipment and…
Get a price on a TS 1
Send the size of the items you paint, the space you have and your paint system. We come back with a recommended booth, a layout and a quote.