TS 2 Entry Level Spray Booth
Downdraft airflow with automatic heating and curing. The step up for workshops that need a dust-free finish and faster turnaround.
- 6.9 × 3.9 × 2.65 m typical
- 22 000 m³/h
- 3 filter stages
- Built to any size
Best for: Engineering and manufacturing plants, equipment and plant maintenance, fleet workshops, refinishers.
In a downdraft booth, filtered air enters through the ceiling, flows down over the item being painted and leaves through the floor. Overspray is carried down and away from the surface instead of drifting across it, which is why downdraft booths give a cleaner finish than cross-draft designs.
The TS 2 adds an automatic heating system. During spraying the booth holds a constant temperature. When you switch to bake, the damper recirculates warm air and the timer runs the curing cycle, so the job is ready to move on sooner and the next one can come in.
What you get
- Downdraft booth in 50 mm insulated panels with ceiling filter plenum
- Side-mounted air unit with two centrifugal fans and a Riello diesel burner
- Spray and bake modes with timer, temperature controller and recirculation damper
- Ceiling lights and a personnel door
- Three stages of filtration from intake to exhaust
- Delivery, installation, commissioning and operator training
| Internal size (standard) | 6 900 mm L × 3 900 mm W × 2 650 mm H |
|---|---|
| Entrance | 3 000 mm W × 2 600 mm H |
| Personnel door | 680 mm W × 2 000 mm H |
| Airflow method | Downdraft |
| Structure | 50 mm insulated panels |
| Lighting | Ceiling lights included |
| Air system | 2 × 3 kW centrifugal fans, side mounted |
| Airflow | 22 000 m³/h |
| Heating | Riello G10 diesel burner, 180 000 kcal/h, recirculation damper. Gas, infrared or electric on request |
| Power | ± 7 kW, 380 V, 50 Hz, 3-phase |
| Filtration | 1. Primary intake filter 2. Ceiling filter media 3. Fibreglass paint arrestor media |
Your size, not ours
The TS 2 is shown at 6 900 × 3 900 × 2 650 mm, but we build it to the internal size your work needs. Type in your dimensions or drag the sliders. The suggested model updates as you go.
When you send a quote request, include the largest item you paint, your building's door and roof height, and any crane or lift you use. We will confirm the size on a drawing before manufacture.
TS 2 installations and details
TS 2 questions
Does the TS 2 need a pit in the floor?
Can I run the TS 2 on gas or electricity instead of diesel?
What is the difference between TS 2 and TS 3?
Other models
TS 1
Extraction and filtration without heating. The quickest, lowest-cost way to get spraying…
TS 3
Our flagship. Separate intake and extraction fans, ceiling and wall lighting, and four…
TS 4
TS 3 technology with drying air movers for water-based paint systems, so flash-off times…
TS 5 Jumbo
A taller, longer version of the TS 3 for large components, machinery, plant equipment and…
Get a price on a TS 2
Send the size of the items you paint, the space you have and your paint system. We come back with a recommended booth, a layout and a quote.