TS 3 Standard Spray Booth
Our flagship. Separate intake and extraction fans, ceiling and wall lighting, and four filter stages for finishes that have to be right first time.
- 6.9 × 3.9 × 2.7 m typical
- 18 000 m³/h
- 4 filter stages
- Built to any size
Best for: OEM and component manufacturers, aviation and defence parts, quality-critical industrial finishing, approved refinishers.
The TS 3 uses two fans: one pushes filtered air in through the ceiling, the other pulls it out through the floor and the exhaust filters. Balancing the two keeps the booth at a slight positive pressure, so dust from the workshop stays out when doors open and the airflow stays even from the top of the item to the floor.
Wall lights at low level let the painter see colour and coverage on the lower sections and undersides, which ceiling lights alone cannot do. The fourth filter stage on the exhaust cleans the air further before it leaves the building.
What you get
- Downdraft booth in 50 mm insulated panels on a raised base with floor grids and ramps
- Separate intake and extraction turbo fans in a side-mounted air unit
- Riello G20 diesel burner with automatic actuated airflow and recirculation damper
- Ceiling and wall LED lights
- Four filter stages from intake to exhaust
- Spray and bake controller with timer and temperature control
- Delivery, installation, commissioning and operator training
Variations we build
- Shorter booths for small sites, such as a 5 × 5 m TS 3 for an aviation workshop
- TS 3 with an adjoining paint mixing room or a separate curing room
- Touch-screen controller with programmable spray and bake cycles
Read next: Spray booth regulations in South Africa
| Internal size (standard) | 6 900 mm L × 3 900 mm W × 2 700 mm H |
|---|---|
| Entrance | 3 000 mm W × 2 600 mm H |
| Personnel door | 680 mm W × 2 000 mm H |
| Airflow method | Downdraft |
| Structure | 50 mm insulated panels |
| Lighting | Ceiling and wall LED lights included |
| Air system | Intake 5.5 kW turbo fan + extraction 5.5 kW turbo fan |
| Airflow | 18 000 m³/h |
| Heating | Riello G20 diesel burner, 200 000 kcal/h, airflow damper. Gas, infrared or electric on request |
| Power | ± 13.5 kW, 380 V, 50 Hz, 3-phase |
| Filtration | 1. G3 pocket filter on intake 2. F5 ceiling filter (SP-600G) 3. Fibreglass paint arrestor media 4. Secondary exhaust pocket filters |
Your size, not ours
The TS 3 is shown at 6 900 × 3 900 × 2 700 mm, but we build it to the internal size your work needs. Type in your dimensions or drag the sliders. The suggested model updates as you go.
When you send a quote request, include the largest item you paint, your building's door and roof height, and any crane or lift you use. We will confirm the size on a drawing before manufacture.
TS 3 installations and details
TS 3 questions
Why does the TS 3 have two fans?
How bright is the booth?
Can the TS 3 be made longer or taller?
Other models
TS 1
Extraction and filtration without heating. The quickest, lowest-cost way to get spraying…
TS 2
Downdraft airflow with automatic heating and curing. The step up for workshops that need…
TS 4
TS 3 technology with drying air movers for water-based paint systems, so flash-off times…
TS 5 Jumbo
A taller, longer version of the TS 3 for large components, machinery, plant equipment and…
Get a price on a TS 3
Send the size of the items you paint, the space you have and your paint system. We come back with a recommended booth, a layout and a quote.