TS 6 XL and XXL Large Industrial Spray Booth
Large industrial spray booths for mining and earthmoving machines, heavy steelwork, trucks and buses. Every TS 6 is designed around the item and the building.
- 15 × 5 × 5 m typical
- 35 000 to 132 000 m³/h
- 4 filter stages
- Built to any size
Best for: Mining OEMs and rebuild centres, heavy steel fabricators, truck and bus manufacturers, marine, rail and heavy engineering.
At 15 or 20 metres, one fan at the end of a booth cannot move air evenly over the whole item. A TS 6 uses several air units along the length, each with its own filters, so every section of the booth gets the same airflow and temperature. Long booths can be split with a central door and run as two booths, heating only the half you are using.
We have built TS 6 booths for mining equipment makers and truck and bus plants, including booths big enough for haul trucks and bulldozers. Lighting is designed to the size, with ceiling lights and several rows of wall lights so painters can see the undersides and the tops of large machines and structures.
How a TS 6 project runs
We visit the site, measure the building and the largest machine, and check power, roof height and crane access. You receive a general arrangement drawing for approval before anything is cut. The booth is built in panels, delivered and installed by our own team (with specialist sub-contractors where required), then commissioned and handed over with operator training. Large booths typically take 12 to 14 weeks from order.
What you get
- Engineering design and general arrangement drawing for approval
- Booth in 50 to 75 mm insulated panels (depending on overall dimensions) with bi-fold or roller doors
- Multiple air units with intake, ceiling and exhaust filtration
- Diesel heating with stainless steel heat exchangers and automatic dampers
- Control panel per section with fan, lights, temperature, timer, faults and emergency stop
- Delivery, installation, commissioning, testing and training
Read next: Planning a spray booth for trucks and mining equipment
| Internal size | From 10 m L × 5 m W × 5 m H, built to any size |
|---|---|
| Example: 15 m booth | 15 × 5 × 5 m, entrance 4 × 4.5 m |
| Example: 22 m booth | 22 × 7 × 7 m, with a central dividing door |
| Largest built | 26 m L × 8 m W × 14 m H |
| Airflow method | Downdraft from the ceiling with side extraction, or cross draft from both sides |
| Structure | 50 to 75 mm insulated panels, depending on overall dimensions |
| Lighting | Ceiling plus multiple rows of wall lights, laid out to your size (up to 70 fittings) |
| Air system | Multiple intake and extraction units along the length, up to 8 × 11 kW |
| Airflow | 35 000 to 132 000 m³/h, depending on size |
| Heating | Riello diesel burners with SS304 heat exchangers, curing up to 60 °C |
| Filtration | 1. EU3 bag pre-filter 2. F5 ceiling filter 3. SP-600G fibreglass paint arrestor 4. Pocket filters on exhaust (where specified) |
| Options | Man-lift platforms, scissor lifts, fire dampers, flame-proof motors, split booth with dividing door |
Your size, not ours
The TS 6 XL / XXL is shown at 15 000 × 5 000 × 5 000 mm, but we build it to the internal size your work needs. Type in your dimensions or drag the sliders. The suggested model updates as you go.
When you send a quote request, include the largest item you paint, your building's door and roof height, and any crane or lift you use. We will confirm the size on a drawing before manufacture.
TS 6 XL / XXL installations and details
TS 6 XL / XXL questions
How big can a TS 6 be?
Do we need heating in a truck booth?
Can you work inside a running plant?
What do we need to provide?
Other models
TS 1
Extraction and filtration without heating. The quickest, lowest-cost way to get spraying…
TS 2
Downdraft airflow with automatic heating and curing. The step up for workshops that need…
TS 3
Our flagship. Separate intake and extraction fans, ceiling and wall lighting, and four…
TS 4
TS 3 technology with drying air movers for water-based paint systems, so flash-off times…
Get a price on a TS 6 XL / XXL
Send the size of the items you paint, the space you have and your paint system. We come back with a recommended booth, a layout and a quote.